Mypress Concept (M) Sdn Bhd
Marketing materials printing in Seri Kembangan: Pick paper by use
GSM tells you a sheet’s weight, but not on its own how thick, stiff or opaque it will feel. Compare actual paper samples for their surface, folds and writing needs before choosing stock for a marketing piece.

A 170 gsm sheet weighs 170 grams per square metre; that number doesn’t tell you its thickness or how stiff it will feel. So don’t choose marketing materials by gsm alone: compare the stock’s bulk, opacity, surface and behaviour in the finished format. For marketing materials printing in Seri Kembangan, start with how people will handle the piece, then choose paper to suit. Mypress Concept (M) Sdn Bhd is a Selangor-based B2B printer that specializes in marketing materials, with its office in Seri Kembangan.
Myth: gsm tells you everything about the sheet
Gsm, or grammage, measures a sheet’s mass per square metre. It isn’t a direct measurement of thickness, stiffness or opacity. Paper bulk, fibre, coating and grain all affect how a sheet feels and bends, so two stocks with the same gsm can behave differently.
For a double-sided flyer with dark text on both sides, hold a printed sample against a bright light and check whether the reverse-side image distracts from the front. Opacity matters here as much as weight. If the sheet will be carried in a folder, bend a corner gently to compare its stiffness; the number on a specification alone won’t show you that feel.
When comparing samples, write down the paper name, gsm and surface beside each one. Otherwise, two samples that look similar on a desk can be hard to distinguish when you come back to make a decision.
Myth: glossy paper always looks more polished
Gloss is a surface finish, not a measure of quality. A gloss-coated sheet can make photographs look crisp and saturated, but its reflective surface may catch bright ceiling lights. A matte surface tends to soften reflections, while uncoated paper has a different, more absorbent feel.
Picture a handout being read beneath LED lighting in a bright lobby. Tilt the sample under those lights: a reflection that crosses the headline or product image can make the message harder to view from that angle. A desk-lit screen preview won’t show the same glare.
If someone needs to write on the piece, test the actual pen on the actual paper. Ballpoint ink can take longer to dry or smear on some coated surfaces. Leave a blank area on the sample, write a short note and check it after a few seconds before settling on the finish.
Myth: thicker stock is the safest choice for every fold
A heavier sheet may feel firmer in the hand, but a sharp fold puts stress on the outside of the crease. On coated stock, that stress can crack the surface and leave a pale line. For a folded leaflet, test the intended crease on a sample made from the proposed stock.
Scoring creates a narrow groove that helps guide a fold and can reduce surface cracking. Paper grain matters too: a fold running parallel to the grain generally bends more cleanly than one running across it. Those details matter on a compact four-panel handout that will be opened and closed repeatedly.
If the crease looks rough or the sheet springs open, ask whether the stock should be scored or the fold direction changed. The useful comparison is the finished fold in your hand, not the flat sheet by itself.
Give marketing materials a paper test before approval
A paper swatch shows colour and texture, but a printed sample lets you judge how the ink, surface and crease work together. Compare samples at the finished size, using the same image and small text on each. Keep them under the lighting where the materials will normally be read.
- Hold each sample up to a bright light to check show-through on double-sided printing.
- Tilt it under overhead lighting and see whether glare crosses the main message.
- Try the planned fold and inspect the outside of the crease for cracking.
- Write in any intended blank area with the pen your team will use, then check for smearing.
Frequently asked questions
Does 170 gsm paper always feel thicker than 150 gsm paper?
No. Gsm measures weight per square metre, while bulk and coating also affect thickness and stiffness. Compare physical samples if the feel or opacity matters to your piece.
Is glossy paper a poor choice for a marketing handout?
Not necessarily. Gloss-coated paper can suit photographic artwork, but reflections may catch the light and make a panel harder to read from some angles. View a printed sample under the lighting where people will use it.
Will heavier paper stop a folded leaflet from cracking?
No, heavier paper can still crack at a tight crease, particularly if it is coated. Test the fold on the proposed stock and ask whether scoring or a different fold direction is appropriate.
How can I compare paper samples before choosing one?
Compare printed samples at the finished size, with the same artwork and text. Check show-through, glare, the crease and how a real pen behaves on the surface.
Choose stock by considering its feel, visibility, folds and writing needs together. A simple hands-on comparison can show you more than gsm alone.
Related articles: How Seri Kembangan Teams Approve B2B Commercial Printing · 4 B2B Printing Checks in Malaysia at Handoff